A-Z Solutions, Inc. 7681 Tim Ave. NW, North Canton, OH 44720330.915.2650info@vaporremoval.com

Category archive: Radon Testing

A-Z Solutions, Inc. Breathes New Life into Cleveland’s Historic Templin Bradley Building

January 19, 2016Denise DiNardaRadon Testing1 comment

Cleveland’s historic Templin Bradley building has been given a facelift. As part of a major restoration project, the building has been renovated into a 30 unit apartment complex. The Templin Bradley building was built in 1916 and is listed on the national register of historic buildings. The property was the home of the Templin Bradley…

Details

HUD Multifamily Radon Testing Protocols: Why you have to test on every Floor of a Building By: Jessica Karns

November 24, 2015Denise DiNardaRadon Testing1 comment

I was recently asked by a client “If radon comes from the ground why do you have to test for it on every level of the building?” To many, this HUD requirement must seem like a very unnecessary and expensive task added to the radon testing protocol of a multifamily building. As a licensed radon…

Details

Revitalizing Cleveland: A-Z Solutions Raises Standards for Energy Efficient Vapor Mitigation in New Construction

November 23, 2015Denise DiNardaRadon Testingno comments

A 16 month new construction project has finally been completed and the results are better than even we expected. As part of the projects’ environmental sustainability program, A-Z Solutions was contracted to design and vapor mitigation systems in 3 newly constructed buildings on the east bank of the Cuyahoga River in Cleveland Ohio. Our project…

Details

Northeast Ohio

A-Z Solutions was contracted to remediate a 350,000 square feet rubber manufacturing facility in the Ohio. As part of the project, the crew was to create a negative pressure field around machine pits that were constructed virtually on top of the underground water table. The installation had to be completed within 30 days from start date. ...
Central North Carolina

The project was 20,000 square feet of a million square foot manufacturing facility in North Carolina. Our goal was to design and install a working vapor intrusion system in under a week. Communication testing showed limited airflow under the slab. Our standard way to address this problem would not be feasible because of the need...
Cleveland Ohio

A-Z Solutions Inc. was contracted to remediate a 130,000 square foot manufacturing facility.In order to accommodate client requests, a large part of the work was completed on the outside of the building in order to not interrupt daily activity inside the building. This was accomplished by using a proprietary remediation technique involving horizontal boring. Five separate...
Central Ohio

A-Z Solutions, Inc. was contracted to design and install a vapor mitigation system in 5 buildings adjacent to a former manufacturing facility totaling approximately 150,000 square feet. The buildings were being used for warehouses, manufacturing facilities, as well as a day care facility. A-Z Solutions, Inc. was challenged with designing 5 separate vapor intrusion systems...
Akron Ohio

The property was a five story multifamily building totaling 120,000 square feet located in Ohio. A-Z Solutions, Inc. issued a radon test report indicating elevated levels of radon gas measuring 10.0pCi/L were found in the building. It was therefore recommended that the building install a radon mitigation system. There was an existing passive radon system...